Do you have a roof installation project in mind and don’t know where to start? You will discover the items needed in this blog to finish your project.
Any roofing project, whether repair, installation, or maintenance must be carried out by qualified personnel. The roof is one of the most important elements of a property and must be taken care of.
Installing a roof should not be done on your own, there are many risks associated with it and it may not turn out well.
Therefore, the best thing to do is to hire a company that specializes in roofing installation. However, it is convenient that you learn what activities your project contemplates.
Keep reading and learn with us all the steps to follow for the correct installation of a new roof.
Roof Installation Procedure in Steps
You should talk to your contractor about all the materials to use. It is convenient to make a list to verify all the supplies and accessories required.
There are a variety of materials available depending on the design of your home and your budget. The local climate and your aesthetic preferences also need to be considered in the choice.
At this point, it is important to look at all the material options available and select what best meets your needs. The contractor should help you in making decisions by explaining the pros and cons of each type of material.
Getting ready before the job begins is one method to make it simpler and prevent damage to your property.
To protect your stuff from debris, you need to move your vehicles and cover your yard with tarpaulin. Placing garbage cans in strategic places within the work area will be very useful.
This step is about having everything prepared so that all activities can be completed smoothly and as quickly as possible.
Removing outdated roofing materials
One of the most important phases in constructing a new roof is removing the old one. If your roof is made of asphalt shingles, your contractor will start by removing the shingles and the rest of the materials.
All material removed will be disposed of in nearby garbage cans or garbage cans.
If your roof is made of metal, the roofer will use a drill or bar to loosen the fastening elements of the panels.
Subsequently, each panel will be removed and placed in a safe place.
Regardless of your old roofing material, the contractor must be trained to remove it correctly.
You must refrain from attempting to remove the roof on your own. Only a roofing expert can ensure that the old roof is removed correctly, protecting the underlayment.
When the old roof is removed incorrectly, extremely expensive repairs can be added. As a consequence, you will end up spending more money than you planned.
Assessing the roof
Your contractor should evaluate the roof sheathing before any work. They should review:
- The elements that provide structural support.
- The basis for roofing materials.
- And other materials or accessories that the roof has to be removed.
The contractor should also inspect the roof for wet spots or hard-to-reach areas. Later, they must establish a plan for working in those areas.
Taking down flashing
After all of the roof and debris have been removed, your contractor should examine the roof flashing. If they are in deplorable condition, new ones must be installed.
New flashing should be installed over roof joints to prevent water infiltration. Flashings are usually made of aluminium or galvanized steel.
The flashing to be installed must be of high quality to last over time. After installation, they must be sealed to prevent water from entering.
Installing the drip edge
The drip edge of each roof descends in two different parts: at the bottom and down the sides of the roof.
At the bottom of the roof, it is located just before the subfloor. While on the sides of the roof, it goes behind.
The first thing the roofer needs to do is install the drip edge at the bottom over the ice and water barrier. Finally, it will be installed in a flat place that goes against the roof.
To maintain the health of a roof, underlayment is essential. It collects water and dissipation to prevent moisture and rot on the frame and lining below.
If one does not exist, your contractor will first install an ice and water barrier. The contractor will place underlayment under the drip edge for added protection.
Along the edge of the roof, the underlayment is placed, and the ice and water barrier is fastened with nails. The roofer will start by placing the underlayment over the drip edge and ice and water barrier. Finally, the underlayment continues around the edge of the roof.
Roofers cover the roof underlayment once it is laid with drip edges on the sides. This is to prevent water from running off the edge of the siding and then back under.
Doing the installation of the new roof
For tiled roofs:
- The contractor must stagger each row of shingles and install starter shingles on the bottom and sides. This is to prevent the tiles from losing water when installing them.
- All nails holding the shingles shall be installed so that the heads are not visible.
For metal roofs:
- The roofer begins by screwing down the vertical edge of each new sheet metal. If each vertical row is screwed before moving on to the subsequent layer, the roof will be flattened.
- Screwing into the ridges instead of the flat will help protect the screws from puddles of water.
Do the corresponding cleaning
The contractor will finish the project by cleaning up any leftover debris. What has not been discarded will be disposed of in the trash cans.
Subsequently, the roof will be inspected to ensure that the materials have not suffered any damage. If all the work was completed by following the steps above, the installation will be successful for the customer.
Anything else I should know before installing a new roof?
To install a roof correctly, all of the above steps must be followed. Thus, a quality installation can be guaranteed.
Installing a roof is not just anything. The roof is what protects you and your family. That is why it is vitally important.
For this reason, I greatly support Sol Harok’s phrase that says:
So, when you start your roofing project, you must hire qualified personnel. Here we teach you how to do it.
What to consider to choose a contractor to install a new roof?
Installing a new roof is a major undertaking, so choosing the best contractor to handle it is crucial.
You should do your due diligence by following these procedures to thoroughly vet professionals before hiring them:
- Review their credentials, experience, and license in depth.
- Look at Internet reviews and ask for recommendations.
- Compare at least three estimates from reputable contractors.
- Verify that the quotes are reasonable and equivalent in cost.
Arrange a face-to-face meeting with your preferred candidate.
It may take some time to find an expert roofer, but it is crucial to give yourself enough time to make the best decision.
Get the Best Roof Installation
You already know all the steps to follow for a proper roof installation in Dublin. You must pay vital attention when choosing your roofing contractor. There are many roofers but not all of them offer quality work according to the corresponding standards.